masscan


masscan号称是世界上最快的扫描软件,可以在3分钟内扫描整个互联网端口,但是这个是由条件的4核电脑,双端口10G网卡

项目地址: https://github.com/robertdavidgraham/masscan

安装

Linux上
sudo apt-get install git gcc make libpcap-dev
git clone https://github.com/robertdavidgraham/masscan
cd masscan
make
Windows上

因为我用的Linux比较多,所用没安过Windows的,请参考:https://www.cnblogs.com/flaray/p/11213730.html

使用

常用命令
masscan 172.16.0.0/16 -p0-65535 --banners --append-output  -oL scan_result.list  --max-rate 10000


# 扫描ip列表文件
masscan -iL ip.txt -p0-65535 --banners --append-output  -oL scan_result.list  --max-rate 10000


# 输出json格式     -Oj
masscan -iL ip.txt -p80,443,3306 --banners --append-output  -oJ result.json  --max-rate 10000

# Note: 发包速率(--max-rate)不要太大,且Linux下比Windows速度快



--adapter-ip     # 指定发包的IP地址
--adapter-port     # 指定发包的源端口
--adapter-mac    # 指定发包的源MAC地址
--router-mac     # 指定网关的MAC地址
--exclude         # IP地址范围黑名单,防止masscan扫描
--excludefile    # 指定IP地址范围黑名单文件
--includefile,-iL # 读取一个范围列表进行扫描
--wait            # 指定发送完包之后的等待时间,默认为10秒
Python脚本解析masscan扫描结果

是基于json输出格式(-OJ)的

# Author:https://www.jianshu.com/p/b6edaa3acbbf

import json
from openpyxl import Workbook
import xlsxwriter
import socket
def get_list(filepath):
    f = open(filepath,encoding='utf-8')
    c = json.load(f)
    list = []
    for i in c:
        ip = i['ip']
        port = str(i['ports'][0]['port'])
        status = 'open'
        try:
            if i['ports'][0]['service']:
                name = i['ports'][0]['service']['name']
                banner = str(i['ports'][0]['service']['banner'])
        except:
            name = ''
            banner = ''
        line = [ip,port,status,name,banner]
        list.append(line)
    return list
def quchong(l1):
    l2 =[]
    for data1 in l1:
        for data2 in l1:
            if data1[0]==data2[0] and data1[1]==data2[1]:
                if data1[3] ==''and data2[3] !='':
                    # print(data1,data2)
                    l2.append(data1)
    for i in l2:
        try:
            l1.remove(i)
        except:pass
    l1 = [list(t) for t in set(tuple(_) for _ in l1)]
    return l1

def write_excle(list):
    f = xlsxwriter.Workbook('port.xlsx')
    worksheet1 = f.add_worksheet('扫描信息')
    worksheet2 = f.add_worksheet('主机ip列表')
    worksheet1.write(0, 0, 'ip')
    worksheet1.write(0, 1, '端口')
    worksheet1.write(0, 2, '状态')
    worksheet1.write(0, 3, '服务')
    worksheet1.write(0, 4, 'banner')
    worksheet2.write(0, 0, '主机ip')
    newlist= []
    for i in list:
        newlist.append(i[0])
    newlist=set(newlist)
    total1 = 0
    total2 = len(newlist)
    newlist=sorted(newlist, key=socket.inet_aton)
    for index, p in enumerate(list):
        total1+=1
        for j, q in enumerate(p):
            worksheet1.write(index + 1, j, q)
    for index, p in enumerate(newlist):
        worksheet2.write(index + 1, 0, p)
    f.close()
    return total1,total2
if __name__ == '__main__':
    filepath = 'C:/1/result.json'  #填写要解析masscan扫描json格式报告的文件路径
    result = get_list(filepath)
    result = quchong(result)
    sum = write_excle(result)
    print('共检测到存活主机%d个,端口信息%d条'% (sum[1],sum[0]))


文章作者: 剑胆琴心
版权声明: 本博客所有文章除特別声明外,均采用 CC BY 4.0 许可协议。转载请注明来源 剑胆琴心 !
评论
  目录